LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2002 >> Sentra SE-R, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 366 (Transfer Case) >> Trouble Diagnosis For System >> Can Communication Line >> Diagnostic Procedure

Diagnostic Procedure

WARNING: This page is about a different car, the 2004 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK CAN COMMUNICATION CIRCUIT (With CONSULT-II) 
    1. Turn ignition switch "ON" and start engine.
    2. Select "SELF-DIAG RESULTS" mode for "ALL MODE AWD/4WD" with in CONSULT-II.
    3. Perform the self-diagnosis.

      Is the "CAN COMM CIRCUIT [U1000]" displayed? 

    1. YES: Print out CONSULT-II screen and GO TO 2.
    2. NO: INSPECTION END 
    Fig 1: CONSULT-II Display
    G00728822Courtesy of NISSAN MOTOR CO., U.S.A.
  2. CHECK CAN COMMUNICATION SIGNALS (With CONSULT-II) 
    1. Turn ignition switch "ON" and start engine.
    2. Select "CAN DIAG SUPPORT MNTR" in "DATA MONITOR" mode for "ALL MODE AWD/4WD" with CONSULT-II.
    Fig 2: CAN Communication Signals
    G00728823Courtesy of NISSAN MOTOR CO., U.S.A.
  3. Print out CONSULT-II screen and go to PRECAUTIONS WHEN USING CONSULT-II in CAN SYSTEM (INTRODUCTION) - Titan article in ACCESSORIES & BODY, CAB. .