LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2002 >> Sentra SE-R, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1660 (Transfer Case) >> Trouble Diagnosis >> CONSULT-II Function (ALL MODE AWD/4WD) >> Data Monitor Mode >> Display Item List

Display Item List

WARNING: This page is about a different car, the 2006 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
DISPLAY ITEM LIST

x: Standard -: Not applicable
Monitored item (Unit) Monitor item selection Remarks
ECU INPUT SIGNALS MAIN SIGNALS SELECTION FROM MENU
VHCL/S SEN.FR [km/h] or [mph] x - x Wheel speed calculated by ABS actuator and electric unit (control unit).
Signal input with CAN communication line.
VHCL/S SEN.RR [km/h] or [mph] x - x Wheel speed calculated by TCM.
Signal input with CAN communication line.
ENGINE SPEED [rpm] x - x Engine speed is displayed.
Signal input with CAN communication line.
BATTERY VOLT [V] x - x Power supply voltage for transfer control unit.
2WD SWITCH [ON/OFF] x - x WD shift switch signal status is displayed.
(4L means 4LO of 4WD shift switch.)
4H SWITCH [ON/OFF] x - x
4L SWITCH [ON/OFF] x - x
4L POSI SW [ON/OFF] x - x This means 4LO switch.
4LO switch signal status is displayed.
ATP SWITCH [ON/OFF] x - x ATP switch signal status is displayed.
WAIT DETCT SW [ON/OFF] x - x Wait detection switch signal status is displayed.
4WD MODE [2H/4H/4L] - x x Control status of 4WD recognized by transfer control unit. (2WD, 4H or 4LO)
VHCL/S COMP [km/h] or [mph] - x x Vehicle speed recognized by transfer control unit.
SHIFT ACT 1 [ON/OFF] - x x Output condition to actuator motor (clockwise)
SHIFT AC MON 1 [ON/OFF] - - x Check signal for transfer control unit signal output
SHIFT ACT 2 [ON/OFF] - x x Output condition to actuator motor (counterclockwise)
SHIFT AC MON 2 [ON/OFF] - - x Check signal for transfer control unit signal output
SFT ACT/R MON [ON/OFF] - - x Operating condition of actuator motor relay (integrated in transfer control unit)
SHIFT POS SW 1 [ON/OFF] x - x Condition of actuator position switch 1
SHIFT POS SW 2 [ON/OFF] x - x Condition of actuator position switch 2
SHIFT POS SW 3 [ON/OFF] x - x Condition of actuator position switch 3
SHIFT POS SW 4 [ON/OFF] x - x Condition of actuator position switch 4
4WD FAIL LAMP [ON/OFF] - x x Control status of 4WD warning lamp is displayed.
2WD IND [ON/OFF] - - x Control status of 4WD shift indicator lamp (rear) is displayed.
4H IND [ON/OFF] - - x Control status of 4WD shift indicator lamp (front and center) is displayed.
4L IND [ON/OFF] - - x Control status of 4LO indicator lamp is displayed.
Voltage [V] - - x The value measured by the voltage probe is displayed.
Frequency [Hz] - - x The value measured by the pulse probe is displayed.
DUTY-HI (high) [%] - - x
DUTY-LOW (low) [%] - - x
PLS WIDTH-HI [msec] - - x
PLS WIDTH-LOW [msec] - - x