LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2002 >> Sentra SE-R, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1140 (Audio System) >> Audio >> Removal and Installation of Audio Unit >> Removal

Removal and Installation of Audio Unit: Removal

WARNING: This page is about a different car, the 2004 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.
  1. Perform damper lock operation. (BOSE system) Refer to "LOCKING CD AUTO CHANGER MECHANISM  ".
  2. Remove center ventilator. Refer to "INSTRUMENT PANEL ASSEMBLY ".
  3. Remove instrument stay cover (LH/RH). Refer to "INSTRUMENT PANEL ASSEMBLY ".
  4. Remove screws (2).
    Fig 1: Removing Screws
    G03492389Courtesy of NISSAN MOTOR CO., U.S.A.
  5. Remove screws (4).
  6. Remove cluster lid C and audio unit.
    Fig 2: Removing Cluster Lid And Audio Unit
    G03492390Courtesy of NISSAN MOTOR CO., U.S.A.
  7. Unlock FPC (Flexible Print Circuit) connector lock on A/C and AV switch side.
  8. Pull off flexible printed circuit from connector.
    Fig 3: Pulling Off Flexible Printed Circuit From Connector
    G03492391Courtesy of NISSAN MOTOR CO., U.S.A.
  9. Remove screws (4) and clips (2). Then remove audio unit from cluster lid C.
    Fig 4: Removing Audio Unit From Cluster Lid
    G03492392Courtesy of NISSAN MOTOR CO., U.S.A.
  10. Remove audio unit screws (8), unified meter and A/C amp. screws (2) and remove bracket.
    CAUTION:
    • When carrying audio unit body, do not touch internal mechanism access from cassette tape slot.
    • Be careful not to allow foreign material to enter from cassette tape slot.
    • Use appropriate screws for each, as screws for audio unit are different from that for unified meter and A/C amp.
    Fig 5: Removing Audio Unit Screws, Unified Meter And A/C Amp. Screws And Bracket
    G03492393Courtesy of NISSAN MOTOR CO., U.S.A.