Front Door Speaker Check (BOSE System)
WARNING: This page is about a different car, the 2004 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK HARNESS
- Turn ignition switch OFF.
- Disconnect BOSE speaker amp. connector and front door speaker connector.
- Check continuity between BOSE speaker amp. harness connector terminal and front door speaker harness connector terminal.CONTINUITY CHECK CHART
Terminals Continuity BOSE speaker amp. Speaker Connector Terminal (Wire color) Connector Terminal (Wire color) B115 13 (L/R) D4 1 (L/R) Yes 14 (L/B) 2 (L/B) 15 (W/B) D34 1 (W/B) 16 (G/B) 2 (G/B) - Check continuity between BOSE speaker amp. harness connector terminal and ground.CONTINUITY CHECK CHART
Terminals Continuity BOSE speaker amp. Ground Connector Terminal (Wire color) B115 13 (L/R) No 14 (L/B) 15 (W/B) 16 (G/B)
OK or NG
- OK: GO TO 2.
- NG:
- Check connector housings for disconnected or loose terminals.
- Repair harness or connector.
- CHECK FRONT SPEAKER SIGNAL
- Connect BOSE speaker amp. connector and front door speaker connector.
- Turn ignition switch ON.
- Push "POWER" switch.
- Check the signal between BOSE speaker amp. harness connector terminals with CONSULT-II or oscilloscope.
OK or NG
- OK: Replace front door speaker.
- NG: GO TO 3.
- CHECK HARNESS
- Turn ignition switch OFF.
- Disconnect audio unit connector and BOSE speaker amp. connector.
- Check continuity between audio unit harness connector terminal and BOSE speaker amp. harness connector terminal.CONTINUITY CHECK CHART
Terminals Continuity Audio unit BOSE speaker amp. Connector Terminal (Wire color) Connector Terminal (Wire color) M44 1 (B) B115 29 (B) Yes 2 (W) 30 (W) 3 (BR) 27 (BR) 4 (Y) 28 (Y) - Check continuity between audio unit harness connector terminal and ground.CONTINUITY CHECK CHART
Terminals Continuity Audio unit Ground Connector Terminal (Wire color) M44 1 (B) No 2 (W) 3 (BR) 4 (Y)
OK or NG
- OK: GO TO 4.
- NG:
- Check connector housings for disconnected or loose terminals.
- Repair harness or connector.
- CHECK FRONT SPEAKER SIGNAL
- Connect audio unit connector and BOSE speaker amp. connector.
- Turn ignition switch ON.
- Push "POWER" switch.
- Check the signal between audio unit harness connector terminals with CONSULT-II or oscilloscope.
OK or NG
- OK: INSPECTION END.
- NG: Replace audio unit.