LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 1995 >> 200SX SE-R, Standard >> Repair and Diagnosis >> Steering >> Steering Column >> Removal & Installation >> Combination Switch >> Removal & Installation

Removal & Installation

  1. Before proceeding, disable SRS. See DISABLING & ACTIVATING  AIR BAG SYSTEM. Remove steering wheel and horn pad. See STEERING WHEEL & HORN PAD  .
  2. Disconnect spiral cable wire connector, and remove screws attaching spiral cable to combination switch. Remove spiral cable. Disconnect combination switch connectors. To remove combination switch assembly, remove base attaching screws. See Fig 1 .
  3. To remove individual switches, remove screws attaching suspect switch to combination switch base. See Fig 1 . To install, reverse removal procedure. See STEERING WHEEL & HORN PAD  .
Fig 1: Removing Combination Switch
G92B01383Courtesy of NISSAN MOTOR CO., U.S.A.
Fig 2: Aligning Spiral Cable (Typical)
G96H20724Courtesy of NISSAN MOTOR CO., U.S.A.