Conditions of Vehicle (Operating Conditions)
- "ENGINE START BY I-KEY" in "Setting change" (in "Special Function") mode of "HANDS FREE MODULE" is "On" when setting on M.U.T.-III SE.
- One or more of Keyless Operation Keys with registered Keyless operation key ID is in the vehicle.
- CHECK KEYLESS OPERATION KEY SYSTEM (DOOR LOCK FUNCTION)
Operate door request switch and check that door lock/unlock operates.
Is the inspection result normal?
YES >>
GO TO 2.
NO >>
Refer to DIAGNOSIS PROCEDURE .
- PERFORM WORK SUPPORT
Perform "INSIDE/OUTSIDE ANT DIAGNOSIS" in "Work support" mode of "HANDS FREE MODULE" using M.U.T.-III SE.
>>
GO TO 3.
- CHECK SELF DIAGNOSTIC RESULT
Check "Self Diagnostic Result" of "HANDS FREE MODULE" using M.U.T.-III SE.
Is DTC detected?
YES >>
Refer to DTC INDEX .
NO >>
GO TO 4.
- CHECK PUSH-BUTTON IGNITION SWITCH
Check push-button ignition switch. Refer to COMPONENT FUNCTION CHECK .
Is the inspection result normal?
YES >>
GO TO 5.
NO >>
Repair or replace malfunctioning parts.
- REPLACE KEYLESS OPERATION KEY UNIT
- Replace Keyless operation key unit. Refer to REMOVAL AND INSTALLATION .
- Confirm the operation again.
Is the inspection result normal?
YES >>
INSPECTION END
NO >>
Check intermittent incident. Refer to INTERMITTENT INCIDENT .