LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2024 >> Eclipse Cross SE >> Repair and Diagnosis >> External Pages >> Different car >> Section 40 (General Information) >> Precautions Before Service >> Initialization Procedure For Learning Value In DFI And MFI Engine >> Initialization Procedure

Initialization Procedure

WARNING: This page is about a different car, the 2023 Mitsubishi Eclipse Cross. However, it is still accessible from the selected car via links, so may be relevant.

Required Special Tools: 

CAUTION: To prevent damage to the scan tool (M.U.T.-IIISE), always turn the ignition switch to the "LOCK" (OFF) position before connecting or disconnecting the scan tool (M.U.T.-IIISE).
  1. After the ignition switch is in "LOCK" (OFF) position, connect scan tool (M.U.T.-IIISE) to the data link connector.
  2. Turn the ignition switch to the "ON" position.
  3. Select "MFI" from System select Screen of the scan tool (M.U.T.-IIISE).
  4. Select "Special Function" from MFI Screen.
  5. Select "Learned value reset" from Special Function Screen.
  6. Select "All learned value" from Learned value reset Screen.
  7. Initialize the learning value by pressing the "OK" button.
  8. After initializing the learning value, the learning value of DFI and MFI engine idling is necessary. Refer to LEARNING PROCEDURE FOR IDLING IN DFI AND MFI ENGINE  .
G12143546Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
G12143547Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.