Manual Transaxle Overhaul - F5MBD
- General Information
- Specifications
- Torque Specifications
- General Specifications
- Service Specifications
- Snap Ring, Spacer And Thrust Plate For Adjustment
- Adjustment Shims (For Differential Side LH Tapered Roller Bearing Preload Adjustment)
- Adjustment Shims (For Output Shaft Bearing Preload Adjustment)
- Shaft Snap Rings (For Input Shaft Synchronizer Hub No. 1 & No2 Bushing End Play Adjustment)
- Shaft Snap Rings (For Input Shaft Radial Ball Bearing Bushing End Play Adjustment)
- Shaft Snap Rings (For Input Shaft 5TH Driven Gear End Play Adjustment)
- Shaft Snap Rings (For Output Shaft 5TH Thrust Washer End Play Adjustment)
- Sealants And Adhesives
- Lubricants
- Special Tools
- Transaxle (Transmission)
- Disassembly And Reassembly
- Notes
- Disassembly Service Points
- Adjustment Before Assembly
- Reassembly Service Points
- >> A << Output Shaft/Input Shaft Installation
- >> B << Slotted Spring Pin Installation
- >> C << Reverse Idler Gear Sub-Assembly, Reverse Idler Thrust Washer And Reverse Idler Gear Shaft Installation
- >> D << Transaxle Case Installation
- >> E << Reverse Idler Gear Shaft Installation
- >> F << Control Housing Installation
- >> G << Back-Up Light Switch Installation
- Inspection
- Disassembly And Reassembly
- Input Shaft
- Disassembly And Reassembly
- Notes
- Disassembly Service Points
- Reassembly Service Points
- >> A << Radial Ball Bearing Installation
- >> B << SYNCHROMESH SHIFTING KEY No. 2 SPRING/SYNCHROMESH SHIFTING KEY No. 2/SYNCHRONIZER CLUTCH HUB No. 2/SYNCHRONIZER RING No. 2 INSTALLATION
- >> C << Snap Ring Installation
- >> D << Snap Ring Installation
- >> E << Ball Installation
- >> F << SYNCHROMESH SHIFTING KEY No. 3 SPRING/SYNCHROMESH SHIFTING KEY No. 3/SYNCHRONIZER CLUTCH HUB No. 3/SYNCHRONIZER RING No. 3 INSTALLATION
- >> G << Radial Ball Bearing Installation
- Inspection
- Disassembly And Reassembly
- Output Shaft
- Disassembly And Reassembly
- Notes
- Disassembly Service Points
- Reassembly Service Points
- >> A << TEPER Roller Bearing Inner Race Installation
- >> B << 1ST-2ND Speed Synchronizer Hub Installation
- >> C << Snap Ring Installation
- >> D << 3RD Driven Gear Installation
- >> E << 4TH Driven Gear Installation
- >> F << 5TH Driven Gear Installation
- >> G << Snap Ring Installation
- >> H << TEPER Roller Bearing Inner Race Installation
- Inspection
- Disassembly And Reassembly
- Control Housing
- Clutch Housing
- Transmission Case
- Differential