LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Mirage ES, Standard Trans >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Power Plant Mount >> Front Axle CROSSMEMBER >> Removal And Installation >> Notes

Removal And Installation: Notes

CAUTION:
  • Before removing the driver's air bag module and steering wheel assembly, always refer to SERVICE PRECAUTIONS Driver's Air Bag Module and Clock Spring P.52B-235. Also, set the front wheels so that they are facing straight forward, and remove the ignition key. If you fail to do this, the SRS clock spring will be damaged, causing the SRS (air bag) to be inoperative and serious injury.
  • The parts indicated by * are the bolts with friction coefficient stabilizer. In removal, ensure there is no damage, clean dust and soiling from the bearing and thread surfaces, and tighten them to the specified torque.
  • After the front wheel alignment adjustment, perform a calibration for the ASC-ECU to learn the steering wheel sensor neutral point. (Refer to STEERING WHEEL SENSOR CALIBRATION .
Fig 1: Exploded View Of Front Axle Crossmember With Torque Specifications
G09631663Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.