LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Mirage ES, Standard Trans >> Repair and Diagnosis >> Engine Mechanical >> Lubrication System >> Engine Lubrication >> On-Vehicle Service >> Engine Oil Pressure Check

Engine Oil Pressure Check

  1. Check engine oil level.
  2. Remove the engine oil pressure switch (Refer to ENGINE OIL PRESSURE SWITCH  .
  3. Install the oil pressure gauge.
    NOTE: Use an adapter of PT 1/8 thread.
  4. Run the engine to warm it.
  5. After the engine has been warmed up, check that oil pressure is within the standard value.

    Standard value: 

    At idle: 29 kPa (4.2 psi) or more 

    At 3, 500 r/min: 294 - 686 kPa (42.7 - 99.4 psi) 

    Fig 1: Locating Engine Oil Pressure Switch
    G09628464Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  6. Remove the oil pressure gauge.
  7. Install the engine oil pressure switch (Refer to ENGINE OIL PRESSURE SWITCH  .