LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2010 >> Lancer ES, Automatic CVT >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Continuously Variable Transaxle On-Vehicle Service - Lancer SPORTBACK >> On-Vehicle Service >> Shift Lock Mechanism Check >> Component Parts Check >> Electrical Circuit

Electrical Circuit

Check for the following operations.

  1. Shift the selector lever to P position.
  2. Using a jumper wire, connect the battery (+) to the selector lever assembly connector terminals No. 3 and No. 4, and the battery (-) to the terminal No. 6. Then, check the operation of shift lock solenoid.
JUMPER WIRE SPECIFICATIONS

Jumper wire Shift lock solenoid
Connect Operate
Disconnect Not operate
Fig 1: Identifying Selector Lever Assembly
G05375820Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.