Service Data Log
WARNING: This page is about a different variant/trim than selected.
- Select "Versions Log Information" on "Service" screen.
- Select "Service Data Log" on the "Versions Log Information" screen.
- The logs are displayed from the latest one.
- The log data is erased by pressing "Delete."
EACH LOG INFORMATION: FACTOR CODE TABLE
FACTOR CODE REFERENCE
| Item | Factor number | Produced log | ||||
|---|---|---|---|---|---|---|
| Drive | 20 | Log concerning focus | ||||
| 21 | Log concerning disk type | |||||
| 22 | Log concerning disk | |||||
| 25 | Log concerning SEEK | |||||
| 26 | Log concerning servo start-up | |||||
| 27 | Log concerning power-On | |||||
| 28 | Log concerning loading/eject operation | |||||
| 29 | Log concerning pick-up operation | |||||
| 30 | Log concerning state of mechanism | |||||
| 52 | Log concerning TOC reading | |||||
| HDD | 1 | Log concerning high temperature | ||||
| 2 | Log concerning low temperature | |||||
| Monitor | 1 | Log concerning high temperature | ||||
| AMP | 0 | Log concerning connection | ||||
| 15 | Log concerning communication | |||||
| SP(1) | 1,2,4,8 | Log concerning number of speakers unexpected | ||||
| CAR(2) | 0 -12, 128 -131, 133,160, 192,255 | Log concerning vehicle model unexpected | ||||
|
||||||
- Select "Time Adjustment Log" on the "Versions Log Information" screen.
- The time adjustment logs are displayed.
As for Factor, the following two types are displayed.
CT: Automatic adjustment
MAN: Manual adjustment