LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2010 >> Lancer ES, Automatic CVT >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 49 (Multi-Media Communications System (MMCS) - Lancer SPORTBACK) >> Diagnosis >> Service Mode >> Memory Initialization

Memory Initialization

WARNING: This page is about a different variant/trim than selected.
  1. Select "Memory Initialization" on "Service" screen.
    Fig 1: Screen Display - Vehicle Signal Check
    G05385459Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  2. If you select "Start" on "Memory Initialization" screen, the settings such as registered locations and music server will be erased (initialized) from the memory.
    NOTE: If the ignition switch is turned to "LOCK" (OFF) position during the initialization, the initialization will be suspended. If the ignition switch is turned to "ACC" or "ON" position, the initialization will be resumed.
    Fig 2: Screen Display - Memory Initialization
    G05385490Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  3. After the memory initialization is complete, the navigation system will restart automatically.
Fig 3: Screen Display - In Early Period Of Memory
G05385490Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.