LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2010 >> Lancer ES, Automatic CVT >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 24 (Combination Meter - Lancer SPORTBACK) >> On-Vehicle Service >> Service Reminder Function Set >> 6. Integrated Value Adjustment

6. Integrated Value Adjustment

WARNING: This page is about a different variant/trim than selected.

At the combination meter replacement or for the vehicle with its battery being removed for a long period (15 days or more), this adjustment is used to reset the mileage and elapsed days for check warning.

  1. On the "Service Reminder" screen, select "6 Integrated value adjustment."
    NOTE: The screen indicates that the current mileage and elapsed days (Nos. 8 and 9 in the data list) are "26 mile" and "0 day."
    Fig 1: Service Reminder Screen Display - Data List (26 Mile And 0 Day)
    G05385269Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  2. To "Set value," input the mileage and elapsed days to be reset.
    NOTE: Always input both the mileage and elapsed days.
  3. Press the "OK" button.
    Fig 2: Service Reminder Screen Display - Set Value
    G05385270Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  4. The mileage and elapsed days are changed. The combination meter automatically recalculates the distance and days to the nearest next check from the settings of mileage and elapsed days for check warning, and then displays them in "Data List."
    NOTE:
    • The screen indicates that the current mileage and elapsed days (Nos. 8 and 9 in the data list) have been changed to "100 mile" and "30 day."
    • Set the elapsed days for check warning to "0 day" by the above resetting method, thereby the timer is reset indirectly.
    Fig 3: Service Reminder Screen Display - Data List (100 Mile And 30 Day)
    G05385271Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.