LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2010 >> Lancer ES, Automatic CVT >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 24 (Combination Meter - Lancer SPORTBACK) >> On-Vehicle Service >> Service Reminder Function Set >> 5. Periodic Reminder Schedule Set

5. Periodic Reminder Schedule Set

WARNING: This page is about a different variant/trim than selected.

The service reminder schedule can be changed.

NOTE: In addition to the operation of the scan tool MB991958, the schedule can be changed by operating the meter information switch on the combination meter. Refer to HOW TO SET BY SPECIAL OPERATION OF SWITCH .
  1. On the "Service Reminder" screen, select "5 Periodic reminder schedule set."
    NOTE: The screen indicates that the current schedule (No. 7 in the data list) has been set to "NAS 1-1."
    Fig 1: Service Reminder Screen Display - Current Schedule (NAS 1-1)
    G05396761Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  2. Set the schedule to be changed from "Set value."
  3. Press the "OK" button.
    Fig 2: Service Reminder Screen Display - Set Value
    G05385267Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  4. The schedule is changed.
    NOTE: The screen indicates that the current schedule (No. 7 in the data list) has been changed to "NAS 1-2."
    Fig 3: Service Reminder Screen Display - Current Schedule (NAS 1-2)
    G05385268Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.