LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2010 >> Lancer ES, Automatic CVT >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 24 (Combination Meter - Lancer SPORTBACK) >> On-Vehicle Service >> Fuel Level Sensor Check >> Fuel Level Sensor Float Height

Fuel Level Sensor Float Height

WARNING: This page is about a different variant/trim than selected.
  1. Remove the fuel pump module (Refer to FUEL TANK <2.4L ENGINE> or FUEL TANK <2.0L ENGINE> ).
  2. When float is moved to contact the float arm on the stopper, ensure that stopper positions "F" (height A) and "E" (height B) are within the standard value.

    <FWD> Standard value: 

    FUEL LEVEL SENSOR FLOAT HEIGHT SPECIFICATION (FWD)

    Float position Float height {mm (in)}
    Stopper position "F" (height A) 181.5 (7.1)
    Stopper position "E" (height B) 26.7 (1.1)
    Fig 1: Identifying Fuel Level Sensor Float Height
    G05906328Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

    <AWD> Standard value: 

    FUEL LEVEL SENSOR FLOAT HEIGHT SPECIFICATION (AWD)

    Float position Float height {mm (in)}
    Main Sub
    Stopper position "F" (height A) 140.9 (5.5) 14.2 ± 3.0 (0.6 ± 0.1)
    Stopper position "E" (height B) 39.1 (1.5) 179.3 ± 3.0 (7.1 ± 0.1)