WARNING: This page is about a different variant/trim than selected.
SPECIAL TOOLS SPECIFICATION
Tool
Tool number and name
Supersession
Application
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
MB991958
MB991824
MB991827
MB991910
MB991911
MB991914
MB991825
MB991826
M.U.T.-III sub assembly
Vehicle communication interface (V.C.I.)
M.U.T.-III USB cable
M.U.T.-III main harness A (Vehicles with CAN communication system)
M.U.T.-III main harness B (Vehicles without CAN communication system)
M.U.T.-III main harness C (for Chrysler models only)
M.U.T.-III measurement adapter
M.U.T.-III trigger harness
MB991824-KIT
NOTE:
G: MB991826 M.U.T.-III Trigger Harness is not necessary when pushing V.C.I. ENTER key.
CAUTION:
M.U.T.-III main harness A (MB991910) should be used. M.U.T.-III main harness B and C should not be used for this vehicle.
ASC check (Diagnostic trouble code display, service data display and calibration by scan tool)
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
MB991997
ASC check harness
Voltage inspection at ASC-ECU terminals
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
MB991223
MB991219
MB991220
MB991221
MB991222
Harness set
Test harness
LED harness
LED harness adaptor
Probe
General service tools
Continuity check and voltage measurement at harness wire or connector for loose, corroded or damaged terminals, or terminals pushed back in the connector.
Connector pin contact pressure inspection
Power circuit inspection
Power circuit inspection
Commercial tester connection
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
MB992006 Extra fine probe
-
Continuity check and voltage measurement at harness wire or connector for loose, corroded or damaged terminals, or terminals pushed back in the connector.