LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2010 >> Lancer ES, Automatic CVT >> Repair and Diagnosis >> Electrical >> Starter >> Starting System -- Lancer >> On-Vehicle Service >> Starter Relay Check

Starter Relay Check

VOLTAGE SPECIFICATION

Battery voltage Terminal number to be connected to tester Continuity test results
Not applied 4 - 3 Open circuit
Connect terminal number 2 and battery (+) terminal.
Connect terminal number 1 and battery (-) terminal.
Continuity (Less than 2 ohms)
Fig 1: Checking Starter Relay
G06671912Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.