LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2007 >> Outlander XLS, AWD >> Repair and Diagnosis >> Steering >> Steering Column >> Power Steering Gear Box And Linkage >> Tie-Rod Oscillating Torque Check

Tie-Rod Oscillating Torque Check

  1. Swing the tie-rod ten times strongly.
  2. Measure the oscillating resistance (oscillating torque) using a spring scale as shown in the figure with the tie-rod end facing downward.

    Standard value: 5 - 16.3 N (44 - 80 in-lb) [1.5 - 4.9 N.m (13.2 - 43.4 in-lb)] 

  3. If the measurement is greater than the standard value, replace the tie-rod.
  4. If the measurement value is below the standard value, check the ball joint for looseness or scraping feeling. If the ball joint swings smoothly, it is judged to be usable.
    Fig 1: Measuring Oscillating Resistance
    G04872172Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.