LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2007 >> Outlander XLS, AWD >> Repair and Diagnosis >> Steering >> Steering Column >> Power Steering Gear Box And Linkage >> Pinion Total Rotation Torque Check

Pinion Total Rotation Torque Check

CAUTION: Secure the steering gear & linkage to the special mounting point. Fixing the steering gear & linkage to another point could deform or damage the gear housing.
  1. Use the preload socket (Special tool: MB991006) to rotate the pinion at a rate of one turn per 4 to 6 seconds, and then measure the pinion total rotation torque.

    Standard value: 

    Total rotation torque: 0.6 - 2.0 N.m (5.3 - 17.6 in-lb) 

    Torque fluctuation: 0.4 N.m (3.5 in-lb) or less 

    Fig 1: Rotating Pinion
    G04872171Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
    NOTE:
    • During measurement, remove the bellows from the gear housing.
    • Rotate the pinion by 180° in left and right directions from the neutral position, and measure the pinion total rotation torque.
  2. If the measurement value is outside the standard value, replace the gear housing.