LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2006 >> Raider XLS, RWD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Service Information (545RFE) >> Sensor - Output Speed >> Installation

Sensor - Output Speed: Installation

Fig 1: Installing Output Speed Sensor
G04285295Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  1. Install the output speed sensor (1) into the transmission case.
  2. Install the bolt to hold the output speed sensor (1) into the transmission case. Tighten the bolt to 12 N.m (105 in.lbs.).
  3. Install the wiring connector onto the output speed sensor (1).
  4. Verify the transmission fluid level. Add fluid as necessary.
  5. Lower vehicle.