LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2006 >> Raider XLS, RWD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Service Information (545RFE) >> Sensor - Input Speed >> Removal

Sensor - Input Speed: Removal

Fig 1: Removing Input Speed Sensor
G04285271Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  1. Raise vehicle.
  2. Place a suitable fluid catch pan under the transmission.
  3. Remove the wiring connector from the input speed sensor (3).
  4. Remove the bolt holding the input speed sensor to the transmission case.
  5. Remove the input speed sensor (3) from the transmission case.