LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2006 >> Raider XLS, RWD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Cooling >> Cap - Radiator Pressure >> Description

Cap - Radiator Pressure: Description

Fig 1: Identifying Radiator Pressure Cap
G04283968Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

All cooling systems are equipped with a pressure cap on the radiator. This cap releases pressure at some point within a range of 131-to-158 kPa (19-to-23 psi). The pressure relief point (in pounds) is engraved on top of the cap (3).

The cooling system will operate at pressures slightly above atmospheric pressure. This results in a higher coolant boiling point allowing increased radiator cooling capacity. The cap contains a spring-loaded pressure relief valve (4). This valve opens when system pressure reaches the release range of 131-to-158 kPa (19-to-23 psi).

A rubber gasket (2) seals the radiator filler neck. This is done to maintain vacuum during coolant cool-down and to prevent leakage when system is under pressure.