LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2006 >> Raider XLS, RWD >> Repair and Diagnosis >> Steering >> Steering Column >> Power Steering >> Steering Wheel >> Installation

Steering Wheel: Installation

Fig 1: Installing Steering Wheel To Column
G04286344Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
NOTE: Do not reuse the old steering wheel bolt (4) (a new bolt must be used)
NOTE: Make sure to align the spline on the steering wheel hub to the column shaft.
  1. Install steering wheel (3) to the column (6).
    NOTE: Be certain that the steering wheel mounting bolt is tightened to the proper torque specification to ensure proper clockspring operation.
  2. Install the new steering wheel bolt (4). Tighten the bolt to 61 N.m (45 ft. lbs.).
    Fig 2: Installing Driver's Side Air Bag To Steering Wheel
    G04286345Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  3. Install the driver's side air bag (3) to the steering wheel. (Refer to INSTALLATION ).