LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2006 >> Raider XLS, RWD >> Repair and Diagnosis >> Steering >> Power Steering >> Key/Lock Cylinder >> Installation

Key/Lock Cylinder: Installation

Fig 1: Installing Key Cylinder Into Housing
G04286337Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

The ignition key (1) must be in the key cylinder (2) for cylinder installation.

  1. Install the key cylinder into the housing using care to align the end of the key cylinder (2) with the ignition switch.
  2. Push the key cylinder (2) in until it clicks.
  3. Replace the upper and lower shrouds.
  4. Reconnect the battery.