DTC B212C: Ignition Run/Start Input Circuit Open: Notes
For a complete wiring diagram, refer to SYSTEM WIRING DIAGRAMS .
- When Monitored:
With the ignition in the Run-Start position .
- Set Condition:
If voltage on the (F201) Fused Ignition Switch Output (Run-Start) circuit drops below 6.50 volts .
Possible Causes
(F941) IGNITION SWITCH OUTPUT (RUN-START) CIRCUIT OPEN
(F201) FUSED IGNITION SWITCH OUTPUT (RUN-START) CIRCUIT SHORTED TO GROUND
OPEN FUSE (27)
(F201) FUSED IGNITION SWITCH OUTPUT (RUN-START) CIRCUIT OPEN
OCCUPANT CLASSIFICATION MODULE (OCM)
OCCUPANT RESTRAINT CONTROLLER (ORC)