DTC U0121: Lost Communication With Anti-Lock Brake Module: Notes
For a complete wiring diagram, refer to SYSTEM WIRING DIAGRAMS .
- When Monitored:
Ignition run time is greater than 1 second. Battery voltage between 9 and 16 volts. Engine run time greater than 3 seconds .
- Set Condition:
The PCM doesn't receive an ABS message over the CAN C circuit for 7 consecutive seconds. The circuit is continuously monitored .
Possible Causes
CAN C BUS OPEN OR SHORTED CONDITION
ABS MODULE
PCM
Refer to DIAGNOSIS AND TESTING for diagnostic procedures and for further possible causes .