DTC P0685: Auto Shutdown Relay Control Circuit: Notes
For a complete wiring diagram, refer to SYSTEM WIRING DIAGRAMS .
- When Monitored:
With ignition on. Battery voltage above 10 volts .
- Set Condition:
An open or shorted condition is detected in the ASD relay control circuit. One Trip Fault. Three good trips to turn off the MIL .
Possible Causes
INTERNAL FUSED B+ CIRCUITS
(K51) ASD RELAY CONTROL CIRCUIT OPEN
(K51) ASD RELAY CONTROL CIRCUIT SHORTED TO GROUND
ASD RELAY
PCM
Always perform PRE-DIAGNOSTIC TROUBLESHOOTING PROCEDURE before proceeding.