DTC P0463: Fuel Level Sensor 1 Circuit High: Notes
For a complete wiring diagram, refer to SYSTEM WIRING DIAGRAMS .
- When Monitored:
Ignition on and battery voltage above 10.4 volts .
- Set Condition:
The fuel level sensor signal voltage at the PCM goes above 4.9 volts for more than 90 seconds. One Trip Fault. Three good trips to turn off the MIL .
Possible Causes
(N4) FUEL LEVEL SIGNAL CIRCUIT SHORTED TO BATTERY VOLTAGE
(N4) FUEL LEVEL SIGNAL CIRCUIT OPEN
(N5) FUEL LEVEL SENSOR RETURN CIRCUIT OPEN
FUEL LEVEL SENSOR
INSTRUMENT CLUSTER
Always perform PRE-DIAGNOSTIC TROUBLESHOOTING PROCEDURE before proceeding.