DTC P0112: Intake Air Temperature Sensor Circuit Low: Notes
For a complete wiring diagram, refer to SYSTEM WIRING DIAGRAMS .
- When Monitored:
With the ignition on and battery voltage greater than 10.4 volts .
- Set Condition:
When the Inlet Air Temp Sensor Signal circuit voltage is less than.078 volt for more than 2.8 seconds. One trip failure. Three good trips to clear the MIL .
Possible Causes
(K21) IAT SIGNAL CIRCUIT SHORTED TO GROUND
(K21) IAT SIGNAL CIRCUIT SHORTED TO THE (K900) SENSOR GROUND CIRCUIT
INTAKE AIR TEMPERATURE SENSOR
PCM
Always perform PRE-DIAGNOSTIC TROUBLESHOOTING PROCEDURE before proceeding.