LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2006 >> Raider XLS, RWD >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel Injection >> Sensor - Intake Air Temperature >> Installation >> 3.7L V-6

3.7L V-6

  1. Check condition of sensor o-ring.
  2. Clean sensor mounting hole in intake manifold.
  3. Position sensor (2) into intake manifold and rotate clockwise until past release tab.
  4. Install electrical connector (3).
    Fig 1: Locating Intake Manifold Air Temperature (IAT) Sensor (3.7L)
    G04283757Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.