LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2006 >> Raider XLS, RWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine And Emission Control >> Reservoir - Vacuum >> Removal

Reservoir - Vacuum: Removal

Fig 1: Identifying Vacuum Supply Components
G04284151Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

The vacuum reservoir (2) is attached to the bottom of the windshield wiper cowl panel (1).

  1. Remove cowl panel.
  2. Disconnect vacuum line (5) at reservoir.
  3. The reservoir is attached using three clips. Pry out on clips for removal.
  4. Remove reservoir from cowl.