LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2006 >> Raider XLS, RWD >> Repair and Diagnosis >> Electrical >> Gauges >> Message Systems >> Overhead Console - Service Information >> Description >> Temperature Display

Temperature Display

All the available overhead consoles on this model include Temperature information. The temperature displays the outside ambient temperature in whole degrees. The temperature display can be toggled from Fahrenheit to Celsius by selecting the desired U.S./Metric option from the customer programmable features. The displayed temperature is not an instant reading of conditions, but an average temperature. It may take the temperature display several minutes to respond to a major temperature change, such as driving out of a heated garage into winter temperatures.

Displayed temperature reading stays in the temperature unit memory. When the ignition switch is turned to the On position, the temperature will display the memory temperature if the engine OFF time is less than 90 minutes. If the engine OFF time is more than 90 minutes, the temperature will display the actual temperature sensed by the ambient temperature sensor. The temperature display update interval varies with the vehicle speed.

The temperature function is supported by an ambient temperature sensor. This sensor is mounted outside the passenger compartment near the front and center of the vehicle, and is hard wired to the Front Control Module (FCM). The FCM sends temperature status messages to the Cab Compartment Node (CCN) over the Controller Area Network (CAN) data bus circuit. The CCN then transfers the temperature information to the EOM for display on the vacuum-fluorescent display screen. For more information on the ambient temperature sensor, refer to DESCRIPTION  .