LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2006 >> Raider XLS, RWD >> Repair and Diagnosis >> Body & Frame >> Windows >> Power Systems >> Switch - Seat - Driver >> Installation

Switch - Seat - Driver: Installation

Fig 1: Installing Power Seat Switch
G04288248Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  1. Install the two screws (3) that secure the power seat switch (2) to the inside of the seat cushion side shield (1).
  2. Install the wire harness connector on the power seat switch assembly.
    Fig 2: Installing Recliner Lever
    G04288249Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  3. position the seat cushion side shield (2) and power seat switch assembly (1) onto the seat frame.
  4. Install the seat cushion side shield screws (3) and (6).
  5. Install the recliner lever (5) on the recliner mechanism release shaft.
  6. Install the screw (4) that secures the recliner lever (5) to the recliner mechanism release shaft on the outboard side of the driver side front seat.
  7. Connect the battery negative cable.