LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2006 >> Lancer Evolution >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 19 (Ignition System) >> On-Vehicle Service >> Spark Plug Cable Resistance Check >> < 2.0L Engine >

< 2.0L Engine >

WARNING: This page is about a different variant/trim than selected.

Measure the resistance of the all spark plug leads.

  1. Check the cap and coating for cracks.
  2. Measure the resistance.

    Limit: 19 kΩ 

  3. If resistance is greater than 19 kΩ, replace the cable.
Fig 1: Measuring Resistance Of Spark Plug Leads
G04271565Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.