LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2006 >> Lancer Evolution L4-2.0L DOHC Turbo >> Repair and Diagnosis >> Heating and Air Conditioning >> Refrigerant Pressure Sensor / Switch >> Testing and Inspection

Refrigerant Pressure Sensor / Switch: Testing and Inspection

PRESSURE SWITCH CHECK




1. Remove the dual pressure switch connector and connect the high/low pressure side terminals located on the harness side as shown in the illustration.
2. Install a gauge manifold to the high-pressure side service valve of the refrigerant line.




3. When the high/low pressure sides of the dual pressure switch are at operation pressure (ON) the resistance should less than two ohms between the terminals. If open circuit, replace the switch.