LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2005 >> Endeavor LS, FWD >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Front Suspension & Wheel Alignment >> Stabilizer Bar >> Removal And Installation >> Notes

Removal And Installation: Notes

CAUTION:
  • Before removing the steering wheel and air bag module assembly, refer to SERVICE PRECAUTIONS and AIR BAG MODULE AND CLOCK SPRING . Also, put the front wheels in straight-ahead position. Failure to do so may damage the SRS clock spring and render the SRS air bag inoperative, which results serious driver injury.
  • *: Indicates parts which should be temporarily tightened, and then fully tightened with the vehicle on the ground in an unladen condition.
Fig 1: Stabilizer Bar Pre-Removal & Post-Installation Operations
G02412112Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
Fig 2: Removing Stabilizer Link & Bar
G02412113Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

Required Special Tool: