LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2005 >> Endeavor LS, AWD >> Repair and Diagnosis >> Engine Mechanical >> Starter >> Starting System >> Starter Motor Assembly >> Inspection >> Armature Check

Armature Check

  1. Check that the armature coil is not grounded.
  2. Place the armature in a growler.
    Fig 1: Placing Armature In Growler
    G02390308Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  3. Hold a thin steel blade parallel and just above while rotating the armature slowly in the growler. A shorted armature will cause a blade to vibrate and be attracted to the core. Replace the shorted armature.
  4. Check the insulation between the armature coil cores and the commutator segments. They are normal if there is no continuity.
    Fig 2: Checking Insulation Between Armature Coil Cores And Commutator Segments
    G02390309Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  5. Check for continuity between the segments. The condition is normal if there is continuity.
    Fig 3: Checking Continuity Between Segments
    G02390310Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.