LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2005 >> Endeavor LS, AWD >> Repair and Diagnosis >> Electrical >> Body Electrical >> Simplified Wiring System (SWS) >> Symptom Procedures >> Windshield Wiper And Washer >> Windshield Wiper And Washer Control Function >> Washer Control

Washer Control

When the ignition switch is in the ACC or ON position, and the windshield washer switch of the column switch is turned ON, the front-ECU turns ON the windshield washer relay. The windshield wiper drive signal is turned ON after 0.15 seconds until 2 seconds after the windshield washer switch goes OFF to operate the windshield wiper continuously. When the windshield washer switch is turned ON, if the windshield wiper is operating intermittently, intermittent operations will be continued after continuous operations.

Fig 1: Identifying Washer Control Function Graph
G02387872Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
NOTE: The wiper drive signal output time varies according to the conditions. Refer to the following table in illustration for details.
Fig 2: Wiper Drive Signal Output Time Chart
G02387873Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.