Testing The Theft-Alarm System
Use the following procedure to test the system:
- Lower the driver's window.
- Arm the system as explained in "Armed stage".
- Make sure that the theft-alarm indicator comes on and flashes in approximately 20 seconds.
- Wait a few seconds and then unlock the driver's side door by using the inside door lock knob and open the door.
- Check to be sure that the horn sounds intermittently and the headlights blink on and off when the door is opened.
- Disarm the system by unlocking doors or the liftgate and glass hatch by the transmitter or using the key.
NOTE:
To make sure the alarm sounds when the engine hood is opened, open the engine hood by using the engine hood release lever when the system is in the "armed" stage.