LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2005 >> Endeavor LS, AWD >> Repair and Diagnosis >> Electrical >> Body Electrical >> Simplified Wiring System (SWS) >> Symptom Procedures >> Keyless Entry System >> Keyless Entry Hazard ANSWERBACK And Horn ANSWERBACK Function >> Keyless Entry Hazard ANSWERBACK Function

Keyless Entry Hazard ANSWERBACK Function

If the keyless entry transmitter is used to send a lock signal to the ETACS-ECU, all doors, the liftgate, and the glass hatch are locked and the hazard warning lights flash once. If an unlock signal is sent, the driver's door is unlocked first,*2 and if a second signal is sent, all doors, the liftgate, and the glass hatch are unlocked. Each time the unlock signal is sent, the hazard warning lights flash twice.

NOTE: *1 : The hazard answerback function can be customized using the keyless entry transmitter (Refer to ENABLING/DISABLING THE ANSWERBACK FUNCTION ) or by using the multi-center display (middle grade type). Refer to ON-VEHICLE SERVICE .
NOTE: *2 : Vehicles with a multi-center display (middle grade type) can be customized so that a single unlock operation will unlock all doors. Refer to ON-VEHICLE SERVICE .
Fig 1: Identifying Keyless Entry Hazard Answerback Function 1
G02387783Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.