How To Check Ecus
- Use the scan tool MB991958 (MUT-III Sub Assembly) and the SWS monitor kit to check ECUs.
- The following ECUs can be checked by using the scan tool MB991958 (MUT-III Sub Assembly) and the SWS monitor kit.
SWS monitor kit-compatible ECUs and their conditions
NOTE:
The "ECU COMM Check" function checks the communication status of ECUs. "NG" does not always mean ECU malfunction. If a malfunction is found by the "ECU COMM Check, proceed to "SYMPTOM PROCEDURE ".
SWS MONITOR KIT-COMPATIBLE ECUS AND THEIR CONDITIONS
| ITEM NO. | ECUS TO BE CHECKED | DISPLAY ON SCAN TOOL | NORMAL CONDITION | ECU CONDITION | ||||
|---|---|---|---|---|---|---|---|---|
| 80 | Column switch (column-ECU) | COLUMN ECU | OK (1) | All of the column switch, power supply, ground and interconnecting communication lines are normal | ||||
| 83 | ETACS-ECU | ETACS-ECU | OK | All of the ETACS-ECU switch, power supply, ground and interconnecting communication lines are normal | ||||
| 84 | Front-ECU | FRONT ECU | OK (2) | All of the front-ECU, power supply, ground and interconnecting communication lines are normal | ||||
| 86 | Sunroof-ECU | SUNROOF ECU | OK (2) | All of the sunroof motor assembly, power supply, ground and interconnecting communication lines are normal | ||||
|
||||||||