LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2005 >> Endeavor LS, AWD >> Repair and Diagnosis >> Drivelines & Axles >> Wheel Hubs >> Front Axle >> Drive Shaft Assembly >> Removal And Installation >> Notes

Removal And Installation: Notes

CAUTION:
  • For vehicles with ABS, do not strike the ABS rotors installed to the BJ outer race of drive shaft against other parts when removing or installing the drive shaft. Otherwise the ABS rotors will be damaged.
  • For vehicles with ABS, be careful not to strike the pole piece at the tip of the front ABS sensor with tools during servicing work.
Fig 1: Post-Installation Operation And Pre-Installation Operation Chart
G02411801Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
Fig 2: Identifying Drive Shaft Assembly - FWD
G02411802Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

Required Special Tools: