Resistance And Continuity Between Harness-Side Connector Terminals
- Disconnect the connector A-32, and connect special tool ABS Check Harness (MB991952) to the wiring harness-side connector.NOTE: Do not connect special tool ABS Check Harness (MB991952) to the TCL/ASC-ECU.
- Measure the resistance and continuity between the terminals indicated in TERMINALS REFERENCE table.
TERMINALS REFERENCE
| CONNECTOR TERMINAL NO. | SIGNAL | NORMAL CONDITION |
|---|---|---|
| 22-31 | Front-left wheel speed sensor | 1.24-1.64 kΩ |
| 21-30 | Front-right wheel speed sensor | 1.24-1.64 kΩ |
| 6-7 | Rear-left wheel speed sensor | 1.24-1.64 kΩ |
| 8-9 | Rear-right wheel speed sensor | 1.24-1.64 kΩ |
| 12 - body ground | Ground | Less than 2 ohms |
| 34 - body ground | Ground | Less than 2 ohms |