General Specifications
WARNING: This page is about a different variant/trim than selected.
General Specifications Chart
| ITEM | SPECIFICATION | ||
|---|---|---|---|
| Propeller shaft | Type | 3 way split 4-joint type propeller shaft | |
| Length* x Outside diameter mm (in) | Front | 697 x 65 (27.4 x 2.56) | |
| Center | 675 x 65 (26.6 x 2.56) | ||
| Rear | 676 x 65 (26.6 x 2.56) | ||
| Universal joint | Type | No.1 | Cross type (Stalking method) |
| No.2 | Cross type (Stalking method) | ||
| No.3 | Constant velocity type (DOJ) | ||
| No.4 | Cross type (Stalking method) | ||
| Cross type joint | Bearing | Non-lubrication type needle roller bearing | |
| Journal diameter mm (in) | 18 (0.71) | ||
NOTE:
*:The propeller shaft length indicates the length between the center points of each joint.