LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2004 >> Diamante LS >> Repair and Diagnosis >> Engine Performance >> System >> Emission Control System >> Emission Control System >> Exhaust Gas RECIRCULATION (EGR) System >> EGR Valve Check

EGR Valve Check

  1. Remove the EGR valve and inspect for sticking, carbon deposits, etc. If necessary, clean with a suitable solvent so that the valve seats correctly.
  2. Connect a hand vacuum pump to the EGR valve.
    Fig 1: Connecting Hand Vacuum Pump To EGR Valve
    G01147817Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  3. Apply 500 mmHg (20 in.Hg) of vacuum, and check to be sure that the vacuum is maintained.
  4. Apply a vacuum and check the passage of air by blowing through one side of the EGR passage.
    Fig 2: Checking Passage Of Air
    G01147818Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  5. Reinstall the EGR valve, using a new gasket, and tighten to the specified torque.

    Specified torque: 22 Nm (16 ft.lbs.)