Charging Warning Light
When engine is stopped and the ignition switch is switched to the "ON" position, electricity flows from the "L" terminal of the generator to the rotor coil (field coil), and at the same time the charging warning light illuminates. When engine is being started/has started, charging voltage is applied to the "L" terminal of the generator, with the result that the charging warning light is extinguished. In addition, because battery voltage is applied to the "S" terminal of the generator, this battery voltage is monitored at the IC voltage regulator, thus switching ON and OFF the current to the rotor coil (field coil) and thereby controlling the output voltage of the generator. Power is supplied to each load from the "B" terminal of the generator.