LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2004 >> Diamante LS >> Repair and Diagnosis >> Body & Frame >> Ignition Switch/Steering Lock >> Ignition Switch & Immobilizer System >> Ignition Switch >> Inspection >> Ignition Switch Continuity Check

Ignition Switch Continuity Check

  1. Remove the instrument under cover. (Refer to INSTRUMENT PANEL ).
  2. Disconnect the wiring connector from the ignition switch and connect an ohmmeter to the switch side connector.
  3. Operate the ignition switch and check the continuity.
    Fig 1: Checking Ignition Switch Continuity (1 Of 2)
    G01125753Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
    Fig 2: Checking Ignition Switch Continuity (2 Of 2)
    G01125754Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.