LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2004 >> Diamante LS >> Repair and Diagnosis >> Body & Frame >> Ignition Switch/Steering Lock >> Ignition Switch & Immobilizer System >> Ignition Switch And Immobilizer System >> Diagnostic Function >> Diagnostic Trouble Code Check >> When Scan Tool is used

When Scan Tool is used

Connect the scan tool to the data link connector then check diagnostic trouble codes.

CAUTION: Make certain that the ignition switch is OFF when the scan tool is connected or disconnected.
NOTE: If the ignition switch is ON with the scan tool connected, some of the warning lights will flash. This is because the data link connector terminal 1 is grounded and diagnostic output via warning lamp will operate. This is not an abnormal condition.