LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2001 >> Mirage ES, Standard >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock >> Component Tests >> BRAKELIGHT Switch

BRAKELIGHT Switch

Connect a multimeter to both terminals on brakelight switch. Continuity should exist when plunger is released. Continuity should not exist when plunger is pushed in 0.16" (4 mm) from outer case edge surface. For vehicles equipped with cruise control, check for continuity at connectors "A" and "B" of the brakelight switch. See Fig 1 .

Fig 1: Identifying Brakelight Switch Connector C-61 Or B-06 Terminals
G00020305Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.